|
Service Telephone & Equipment, Inc. Integrated Communication Systems |
|
Panasonic KX-TD, KX-TDA or KX-TDE 1. Enter programming mode by pressing [PROG × × 1 2 3 4]. 2. Enter program [0 0 0] and press [ENTER]. 3. Press [NEXT] to display time. 4. Enter the correct hour. 5. Press [à] to advance cursor to minute selection. 6. Enter the correct minutes. 7. Press [à] to advance to the AM/PM selection. 8. Press [MUTE] button to select AM or PM. 9. Press [STORE] button 10. Lift and replace the handset to exit programming mode. |
|
Samsung DCS & iDCS 1. Press [TRSF] button. 2. Enter [2 0 0]. 3. Enter [1 2 3 4] (or your passcode if different). 4. Press [VOL UP] button. 5. Press [TRSF] [TRSF]. 6. Enter [5 0 5]. 7. Enter Day, Date & Time W= Day of Week (1=Monday, 2=Tuesday, etc.) MM= Month DD= Day YY= Year HH= Hour MM= Minute (enter in military format) 8. Press [TRSF] button |
|
Samsung 816 Plus 1. Press [# 0 6] button. 2. Enter [4 3 2 1 1]. 3. Press [#] [#]. 4. Enter [5 5]. 5. Enter Day, Date & Time W= Day of Week (1=Monday, 2=Tuesday, etc.) MM= Month DD= Day YY= Year HH= Hour MM= Minute (enter in military format) 6. Press [#] button. |
|
Samsung StarMail 1. Press the voice mail button on any phone or dial [5 1 0]. 2. Enter [× × 4 5 6 #]. 3. Enter [3 2 0 #]. 4. Enter the time in 12 hour (AM / PM) format and press #. 5. Enter [1] or [2] and press 6. Enter [#]. 7. Enter [1 1 0 #]. |
|
Avaya/Lucent/Partner/AT&T 1. At extension no. 10, press [FEATURE 0 0]. 2. Press the left [INTERCOM] twice. 3. Enter [# 1 0 3]. 4. Enter the correct time in 24 hour format. 5. Press [FEATURE 0 0]. |
|
Merlin Legend/Merlin Magix Must be set from the System Programming Console 1. Press [MENU]. 2. Press [SYSTEM PROGRAM]. 3. Press [EXIT] or [START]. 4. Press [SYSTEM]. 5. Press [TIME] or [DATE]. 6. Enter the time in military 24 format. or Enter the date in mmddyy format. 7. Press [ENTER]. 8. Press [EXIT] or [BACK]. 9. Press [HOME] or [EXIT] to exit programming mode |
|
Avaya IP Office 500 The Avaya IP Office 500 System automatically changes the time from the caller ID information. If the system is connected to a network it would get the time from the server. |
|
NEC Electra Must be set from the primary phone, typically ext. 100. 1. Press [FEATURE]. 2. Dial [9 #]. 3. Enter hour and minute. 4. Press [RECALL] to change AM/PM Setting. 5. Press [HOLD] to change the calendar setting. 6. Press [RECALL] to change the day of the week. 7. Dial [#] to move the cursor to day of month. 8. Enter day of month. 9. Press [RECALL] to select month. 10. Dial [#] to move the cursor to year. 11. Enter the last two digits of the year. 12. Press [FEATURE] to exit. |
|
To select one of the manufacturers listed below, click to follow link. You will be redirected to a different website. Click the Back button to return to this page. |
|
Service Telephone & Equipment, Inc. Integrated Communication Systems |
|
Time Change |
